Configuring Basic Gatekeeper Settings - Avaya Scopia XT Series Deployment Manual

Field Name
Gateway (IP Address)
DNS (Server IP
Address)
3. Select Next and continue with one of the following, depending on whether you are
registering your endpoint to a gatekeeper or SIP server:
• If you are registering your endpoint to a gatekeeper, continue with
Gatekeeper Settings
• If you are only registering your endpoint to a SIP server (and not a gatekeeper),
continue with
If you are not using a gatekeeper in your deployment, select Next > Done.
Related links
Configuring Basic Settings with the Quick Setup Wizard

Configuring Basic Gatekeeper Settings

About this task
Configure the gatekeeper settings if your Avaya Scopia
routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP
address of an endpoint, and handles the initial connection of calls. To modify advanced
gatekeeper settings, see
This is typically not relevant for IP Office deployments. Configure only if you are using a
gatekeeper in your deployment.
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Configure the gatekeeper connection as described in the following table.
Field
Use Gatekeeper
December 2017
Description
Enter the default gateway static IP address. The gateway is used to
route information between two subnets, for example, between the
headquarters and a partner site. For dynamic IP addresses, this field
displays the current gateway IP address.
Enter the DNS server IP address. The DNS server translates domain
names into IP addresses. For dynamic IP addresses, this field displays
the assigned DNS server IP address.
For web collaboration and cloud connection to Avaya Equinox
Management, you must insert a valid DNS address.
on page 101.
Configuring Basic SIP Settings
Configuring Advanced Gatekeeper Settings
Description
Choose whether this endpoint is registered to a gatekeeper, like
the H.323 Gatekeeper.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
on page 102.
on page 96
®
XT Series works with one. A gatekeeper
on page 96, and skip to this step.
Configuring Basic
on page 134.
Configuring Basic
Table continues...
101