Avaya Scopia XT Series Deployment Manual page 234

Troubleshooting the Avaya Scopia
2. Set the Audio delay automatic estimation field to Yes.
This enables the endpoint to constantly measure the audio delay.
3. Set the Apply audio delay value field to Yes.
This enables the system to fix problems with the audio delay.
4. From the web interface only, select Save.
5. If necessary to further fine tune audio delay on the Microphone Pod, perform these steps:
a. Navigate to audio tests. From the XT Series web interface, select Diagnostics > I/O
Connections > Audio > Tests. From the endpoint's main menu, select Configure >
System Status > Diagnostics > I/O Connections > Audio > Tests.
b. Bring the Microphone Pod to about 1 m (3 feet) from the monitor. Keep silent.
c. Select Audio delay detection
The monitor generates an evaluation noise and the XT Series estimates the audio
delay introduced by the monitor. The display shows the audio delay in milliseconds,
and uses this value to calculate the audio delay and improve the echo cancellation
performance.
Related links
Troubleshooting the Avaya Scopia
December 2017
® XT Series
Figure 168: Configuring echo cancellation settings
Figure 169: Testing the audio from the web interface
®
XT Series
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
and select Yes.
on page 220
234