Adjusting The Image Position - Avaya Scopia XT Series Deployment Manual

Initial Configuration of the XT Series
Field
Country
Language
Protocol Type
2. To adjust the image on your monitor, select Next and continue with
Position on page 98.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
Related links
Configuring Basic Settings with the Quick Setup Wizard

Adjusting the Image Position

About this task
You can center the endpoint's image correctly on its monitor in this stage of the Quick Setup
Wizard.
This is for deployments with a monitor connected to your Avaya Scopia
December 2017
Description
Enter the country location of the unit. The system menu and the
Language field automatically changes to the language used in the
selected country.
Choose the language of the graphical menu. The web menu
language can be changed in each web client without impacting the
system GUI.
Select the protocol the endpoint should use for calls, depending on
the organization's existing infrastructure (SIP or H.323–based).
Contact your administrator for more information.
• H.323: Select if you are registering the endpoint to a gatekeeper
only. The wizard displays the gatekeeper configuration page. For
more information, see
page 101 or contact your administrator.
• SIP: Select if you are registering the endpoint to a SIP server
only. The wizard displays the SIP server configuration page. For
more information, see
page 102 or contact your administrator.
You can register the endpoint to as many as three SIP servers
(see Registering the XT Series to IP Office
• H.323 and SIP: Select if you are registering the endpoint to both
a gatekeeper and a SIP server. The wizard displays both the
gatekeeper and SIP server configuration pages. For more
information, see
page 101 and
contact your administrator.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic Gatekeeper Settings
Configuring Basic SIP Settings
Configuring Basic Gatekeeper Settings
Configuring Basic SIP Settings
on page 96
®
XT Series.
on
on
on page 88).
on
on page 102, or
Adjusting the Image
98