Avaya Scopia XT Series Deployment Manual page 18

Initial Workflow for Deploying the Avaya Scopia
Without a license key to activate the product, you can only use the system in preview mode
for 30 days (effective power on time, not calendar days).
8. Get started with the basic configuration to use the XT Series, as described in
Configuration of the XT Series
defining network settings, if your XT is not autoprovisioned by Equinox Management.
9. Configure the system to work with the IP Office Proxy/Registrar, as described in
the XT Series to IP Office
videoconferences on the built-in MCU.
For more information about deploying and configuring XT Series with IP Office, see IP Office
Video Collaboration Solution - Installation Notes.
10. If you are using the XT Series as a server only, disable local video and audio as described in
Disabling Local Audio and Video for Server Deployment
11. (Recommended) You can prevent users from altering advanced settings by changing the
default administrator PIN code, and you can optionally set a user PIN code to protect basic
settings too (see
To change the default login settings for the XT Series web interface, see
Access to the XT Series
12. If your XT Series is an endpoint, not just a server, configure your camera and microphone
settings, as described in:
• Configuring Cameras
• Configuring Microphones
13. If necessary for your deployment, configure your advanced network and call settings, as
described in
example:
• Setting the IP address
• Enabling NAT and Firewall Traversal
Note:
If your system is autoprovisioned by Equinox Management, you can skip these steps.
For more information about deployment setups, see
®
Scopia XT Series Deployment
14. (Optional) If necessary for your organization, you can secure videoconference sessions via
encrypted connections and TLS certificates (see
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited
for usage. For more information, consult your local reseller.
15. To update your software, see
an updated license.
December 2017
® XT Series
on page 93, including running the quick setup wizard, and
on page 88. If you do not register to IP Office, you cannot host
Setting PIN Codes for the XT Series
on page 196.
on page 111
on page 116
Configuring Advanced Network Settings
on page 19 .
Updating the XT Series
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 91.
on page 195).
on page 125. This includes, for
Planning the Topology of the Avaya
Securing your XT Series
on page 178. Some upgrades require
Initial
Registering
Securing Web
on page 195).
18