Avaya Scopia XT Series Deployment Manual page 77

Figure 44: Pre-provisioning an Endpoint Page — Server and Endpoint Service Codes
4. Optionally, select Duplicate Settings... at the top of the page to copy settings from another
endpoint. The following dialog box opens, where you enter the XT endpoint name in the
provided cell to indicate from where you want to copy settings.
5. On the Pre-provisioning an Endpoint page, configure the values for the endpoint in the
Basic Settings section:
Table 12: Basic Settings Fields
Field Name
Name
Username (H.323 ID)
Phone number (E.164):
Location
December 2017
Provisioning Avaya Scopia
Figure 45: Duplicate Settings Dialog Box
Description
The name of the endpoint
The H.323 username of the endpoint (displayed in H.323 calls)
The phone number of the endpoint
The location of the endpoint
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
® XT Series Endpoints Automatically
Table continues...
77