Hiding Recent Call List And Call Rate Selection List - Avaya Scopia XT Series Deployment Manual

Procedure
1. Access the general call settings. From the XT Series web interface, select Administrator
Settings > Protocols > General. From the endpoint's main menu, select Configure >
Advanced > Protocols > General.
2. Choose from the following options:
• To reject SIP incoming calls, select GLAN1, GLAN2, or GLAN1&GLAN2 from the
Reject SIP Incoming Calls menu, depending on the network interface you want to
disable.
• To reject H.323 incoming calls, select GLAN1, GLAN2, or GLAN1&GLAN2 from the
Reject H.323 Incoming Calls menu, depending on the network interface you want to
disable.
Note:
GLAN2 may be missing in some XT Series products. It requires an optional license.
When a protocol, SIP or H.323, is disabled, incoming calls using that protocol are
automatically rejected.
If a VLAN is active on a GLAN, all incoming calls coming from the VLAN will be
disabled as well.
3. From the web interface only, select Save.
Related links
Advanced Configuration of the XT Series

Hiding Recent Call List and Call Rate Selection List

About this task
You can hide the recent call and call rate selection lists from end users of the XT Series.
December 2017
Figure 129: Rejecting Incoming Calls
on page 121
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Hiding Recent Call List and Call Rate Selection List
187