Avaya Scopia XT Series Deployment Manual page 109

Video collaboration solution for ip office
Hide thumbs Also See for Scopia XT Series:
Table of Contents

Advertisement

Field
Description
Name
Important:
To reset the number of monitors to the default <auto > setting, press layouts
on the XT Remote Control Unit when XT is not in a call. The system then automatically
detects the number of connected monitors.
If your monitor crops the edges of the image shown in their displays, adjust it as described in
Resolving Monitor Display Problems
Resolution
Defines the resolution of the connected main monitor (HD1
HD1/HD2
).
• <auto> sets the resolution and frame rate depending on the XT Series system and location and
monitor capabilities.
• 1080p forces 1080p resolution at 25, 30, 50 or 60 frames per second (fps) even if the monitor
does not support it.
A license may be required for this option.
• 720p forces 720p resolution at 50 or 60fps even if the monitor does not support it.
• 480p60 forces 480p resolution at 60fps even if the monitor does not support it.
• 1280x1024p60 forces 1280x1024 resolution at 60fps, with an aspect ratio of 5:4.
• 1400x1050p60 forces 1400x1050 resolution at 60fps, with an aspect ratio of 4:3.
You can preserve the aspect ratio of the presentation and video by setting Keep Aspect Ratio to
Yes. For more information about this setting, see Avaya Scopia
Duplicate
Select Yes if you have two monitors and you want the monitor connected to HD2
to HD2
the same as HD1
Monitor
Select Never if you do not want to turn off monitor.
Turn Off
Select Only on shut down if you want the monitor turned off only when system is turned off,
Select On screen saver if you want the monitor turned off when system is on screen saver or
turned off.
This feature works only with monitors that support CEC over HDMI
Screen
Select the time period after the screen saver appears after which you want the monitor to switch
saver time
off. This feature works only with monitors that support CEC over HDMI.
out
4. From the web interface only, select Save.
5. Configure the video layout. Select Monitor > PIP-PaP-PoP.
December 2017
but without system menus.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 235.
) and auxiliary monitor (HD2
®
XT Series User Guide.
Configuring Monitors
and then 0
to display
109

Advertisement

Table of Contents
loading

Table of Contents