Avaya Scopia XT Series Deployment Manual page 141

You can set a time limit for:
• Point-to-point calls
• Hosted calls (embedded MCU)
Once you set a time limit, an alert appears during the meeting when the time limit is reached. The
user can then decide to disconnect from the videoconference, postpone the reminder and extend
the meeting for another hour, or remove the time limit from this meeting. The meeting
automatically closes if there is no response to the alert after 30 seconds.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Set the time limit for embedded MCU calls.
a. Access call settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > MCU. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > MCU.
b. Define the time limit for meetings with multiple participants in the Meeting Time Limit
field.
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
December 2017
From the web interface
Figure 91: Setting a time limit for videoconferences
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Setting a Time Limit for Videoconferences
on page 122.
141