Avaya Scopia XT Series Deployment Manual page 129

2. Set the Priority setting to the GLAN port that the preferred network uses. When the routing
of a call cannot be determined by matching the destination address with the GLAN
address, it uses the preferred network port.
3. From the web interface only, select Save.
4. To define the MTU size and network speed for each port, access the advanced network
settings. From the XT Series web interface, select Administrator Settings > Networks >
GLAN1/GLAN2 > Parameters. From the endpoint's main menu, select Configure >
Advanced > Networks > GLAN1/GLAN2 > Parameters.
Figure 84: Configuring advanced network connection from the web interface
5. Set the fields as described in
Table 32: Configuring network connectivity
Field Name
MTU
December 2017
Figure 83: Choosing the priority network port
Table 32: Configuring network connectivity
Setting
The MTU, or Maximum Transmission Unit, is the maximum size of data
packets sent around your network. This value must remain consistent
for all network components, including servers like the MCU and/or
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Advanced Network Settings
on page 129.
Table continues...
129