Configuring Advanced Regional Audio And Video Settings - Avaya Scopia XT Series Deployment Manual

Advanced Configuration of the XT Series

Configuring Advanced Regional Audio and Video Settings

About this task
After you set the country and language of the device in the Quick Setup Wizard, the system
defaults to the audio and video standards of that country. This section details how to change those
settings if required.
Procedure
1. Access the XT Series web interface, as described in
2. Select Administrator Settings > System > Location.
3. Define regional settings as described in
page 146.
Table 43: Configuring regional information
Field Name
System name
Country
Language
December 2017
Figure 96: Setting regional information
Description
Enter the name which appears in the local endpoint title bar and in the
remote endpoint interface (if connected).
Select the location of the XT Series. This populates the other fields
automatically.
Select the language used in the XT Series endpoint's interface.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Accessing Web Interface
Table 43: Configuring regional information
on page 71.
on
Table continues...
146