Configuring Basic Sip Settings - Avaya Scopia XT Series Deployment Manual

Video collaboration solution for ip office
Hide thumbs Also See for Scopia XT Series:
Table of Contents

Advertisement

Initial Configuration of the XT Series
Field
Mode or Automatic IP
Address
Gatekeeper address
E.164
3. If you are registering your endpoint to a SIP server, select Next and continue with

Configuring Basic SIP Settings

Quick Setup Wizard.
Related links
Configuring Basic Settings with the Quick Setup Wizard
Configuring Basic SIP Settings
About this task
This section explains how to register your XT Series to the IP Office SIP server. If you do not
register to IP Office, you cannot host videoconferences on the built-in MCU.
The XT Series can function in a SIP environment, where endpoint names or numbers are
managed by SIP servers, not gatekeepers. You can dial an endpoint by entering its name or
number like 1234 or joe_smith, rather than remembering its IP address, where the SIP server
routes the call correctly. To do this, the SIP server must register all endpoints to maintain the
mapping list of names/numbers and endpoints to successfully route calls.
For more information about deploying and configuring XT Series with IP Office, see IP Office
Video Collaboration Solution - Installation Notes.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Basic Settings with the Quick Setup Wizard
Verify that you have the following information about your SIP environment:
• The DNS name or IP address of the Avaya IP Office server.
• Credentials for authenticating XT Series to the Avaya IP Office server.
Procedure
1. Enter information for the SIP server, as described below.
December 2017
Description
This is typically not relevant for IP Office deployments.
Configure only if you are using a gatekeeper in your
deployment.
Choose whether the endpoint is configured to automatically
detect the gatekeeper. For more information, ask your network
administrator.
Enter the IP address or DNS name of the gatekeeper.
Enter the H.323 number required to dial the endpoint.
on page 102. Otherwise, select Done to complete the
on page 96, and skip to this step.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 96
Configuring
102

Advertisement

Table of Contents
loading

Table of Contents