Avaya Scopia XT Series Deployment Manual page 99

Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Decide if the monitor's image needs adjusting, by verifying if the white border of the
triangles in the top left and bottom right corners are fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
3. Press 1 to highlight the triangle in the top left corner in blue.
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
visible in the screen, then press ok/menu.
5. Press 2 to highlight the triangle in the bottom right corner in blue.
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
then press ok/menu.
7. To continue with the Quick Setup Wizard, select Next (see
Settings on page 100).
If your monitor is 4K and your system is an Avaya Scopia
adjustment is not applied.
Related links
Configuring Basic Settings with the Quick Setup Wizard
December 2017
Figure 61: Examining the image position
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
on page 96.
Configuring Basic Network
®
XT7000 Series, graphic
on page 96
Configuring Basic
99