Deleting Xt Series Certificates - Avaya Scopia XT Series Deployment Manual

3. If you select Backup and Remove, the system first copies the certificates and associated
keys to the USB key and then removes them from the XT Codec Unit.
4. To restore a certificate into the system, select Advanced > Utilities > Certificates >
Restore (Figure 148: Backing up or restoring certificates
restores the certificates and associated keys to the system.
5. To remove a certificate from the system, select Advanced > Utilities > Certificates >
Delete Certificate. When you remove a certificate, the system returns to using the default
certificate.
Related links
Securing Connections to the XT Series Using TLS

Deleting XT Series Certificates

About this task
This section explains how to remove or uninstall a certificate from the XT Series using the web
interface.
You might need to remove certificates if:
• For privacy reasons, you do not want to keep your certificates on a shared endpoint.
• The system generated errors while creating the CSR and you want to replace it with a new
one.
• You want to use a different CA for signing your certificates.
• Your certificate has expired.
• You changed the system's IP or DNS address.
Important:
To generate a certificate signing request, you can use the system IP address or DNS
name. If you use an IP address, please assure that it is a static IP address, since the
December 2017
From the endpoint interface
Figure 148: Backing up or restoring certificates
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Securing Connections to the XT Series Using TLS
From the web interface
on page 211). This automatically
on page 201
211