Avaya Scopia XT Series Deployment Manual page 49

Note that this is an example diagram. The back panel for Deluxe and Flex cameras is
different from this one.
4. Attach the two connectors on the other end of the camera cable as shown in
Connecting cables to the XT5000 Series
the XT7000 Series
a. For the XT5000 Series: The HDMI connector to the HDMI socket labeled 1 on the
Avaya Scopia
b. For the XT7000 Series: The HDMI connector to the HDMI socket labeled 1 on the
XT7000 Series.
c. The connector for power and serial control must be connected to the
socket on the XT Codec Unit.
December 2017
on page 50:
®
XT Camera Switch.
Figure 22: Connecting cables to the XT5000 Series
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Connecting Cameras or DVD players
on page 49 and Figure 23: Connecting cables to
Figure 22:
horizontal
49