Avaya Scopia XT Series Deployment Manual page 118

Initial Configuration of the XT Series
Field
General
POD1/POD2
Digital Audio
Analog Audio
HD1/HD2 (only XT7000
Series)
USB Camera
USB Microphone
3. Set the fields as required.
December 2017
From the endpoint interface
Figure 76: Choices of audio input to configure
Description
Enable automatic disabling of some audio inputs depending on
which audio inputs are connected.
Configure the
Configure the
microphone via its mini-TOSlink connector.
Configure the
Pod or a third-party analog microphone via its 3.5mm jack.
Select to configure sound from HDMI devices.
Configure the USB port for audio of a built-in microphone from a
USB camera. If you connect another audio input with echo
cancellation enabled, the audio from the USB camera is disabled.
Configure the USB port for audio of a dedicated USB microphone
or headset. However, any connected Microphone Pods are
disabled by default if Audio Inputs Management is set to
Automatic. To change this, set I/O connections > Audio -
Input > General > Audio Inputs Management to Manual.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
From the web interface
port for the Microphone Pod.
port when connecting a third-party digital
port when connecting the One-way Microphone
118