Configuring Advanced System Name Settings - Avaya Scopia XT Series Deployment Manual

5. We recommend changing the default administrator password, as described in
Codes for the XT Series
Related links
Advanced Configuration of the XT Series

Configuring Advanced System Name Settings

About this task
You can set the basic system name in the Quick Setup Wizard (see
Language, and Call Method
system name, such as the SIP username.
The name is displayed on the system's title bar
is shown to participants seeing your image in a videoconference (for example: John-Smith, or
9th-Floor-Room, or NY-Office).
Depending on your integration, you can configure your XT Series to show one of several names:
• Use the system name as defined in the Quick Setup Wizard.
• Use the unicode version of the system name for non-English characters.
• Use the SIP username if this XT Series is registered to a SIP registrar or proxy. This is the
same as the System Name, unless you change it manually as described in
XT Series to IP Office
December 2017
Figure 78: Advanced configuration screen on the endpoint
on page 195.
on page 121
on page 97). This procedure describes how to use an alternate
Figure 79: XT Series's titlebar
on page 88.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Advanced System Name Settings
Setting the System Name,
(Figure 79: XT Series's titlebar
Setting PIN
on page 123), and
Registering the
123