Configuring Basic Settings With The Quick Setup Wizard - Avaya Scopia XT Series Deployment Manual

Initial Configuration of the XT Series

Configuring Basic Settings with the Quick Setup Wizard

About this task
To start using your Avaya Scopia
wizard, such as the system's name, language, and network settings. This is relevant for both new
installations, or after restoring default settings. You can only calibrate the image on the endpoint
itself using its monitor, not from the web interface.
Some settings may already be customized for your organization. If required, ask the system
administrator for the device's password.
The quick setup wizard automatically appears the first time you access the XT Series, either by
turning it on or logging in to the web interface. Alternatively select Configure > Quick Setup from
the Main Menu.
The quick setup wizard guides you through many of the following basic configuration tasks:
Related links
Initial Configuration of the XT Series
Setting the System Name, Language, and Call Method
Adjusting the Image Position
Configuring Basic Network Settings
Configuring Basic Gatekeeper Settings
Configuring Basic SIP Settings
Setting Date and Time
Setting the Time Zone
Configuring the Screen Saver to Start Automatically
December 2017
®
XT Series, first define basic settings with the quick setup
Figure 59: Accessing the Quick Setup
on page 93
on page 98
on page 100
on page 101
on page 102
on page 103
on page 104
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 97
on page 105
96