Remotely Controlling The Xt Series With At Commands - Avaya Scopia XT Series Deployment Manual

2. Set the fields as required.
Table 52: Configuring Rules for Accessing XT Web Video
Field Name
Web Video Management
Enable all addresses
Address
Subnet mask
Password
Note:
You cannot change the settings using the web interface.
Related links
Advanced Configuration of the XT Series

Remotely Controlling the XT Series with AT Commands

About this task
For complex room setups, you can remotely control your Avaya Scopia
controllers like AMX, Creston or Extron devices
commands. It has this name because while it is proprietary, it has a similar syntax to the standard
modem AT commands, using ASCII characters to communicate messages.
December 2017
Figure 117: Web Video Settings
Description
Select No to disable the feature.
Select No to restrict web video remote access via TCP to specific
devices with an IP address in the range of the Address and
Subnet Mask fields below.
Enter the IP address of control devices allowed to remotely access
web video.
Enter the Subnet mask to modify the Address field into a range of
addresses allowed to remotely access web video.
Enter a password required to access the web video feature.
on page 121
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Remotely Controlling the XT Series with AT Commands
which use a proprietary API known as AT
®
XT Series from
173