Fujitsu F2MC-16LX Hardware Manual page 92

CHAPTER 3 INTERRUPTS
[bit0] SE
The SE bit controls the termination of the expanded intelligent I/O service by requests from
the built-in resource.
Table 3.6-8 EI
SE
0
1
■ Buffer Address Pointer (BAP)
The buffer address pointer is a 24-bit register for storing the address to be used next by the
2
EI OS. A separate BAP exists for each channel of the EI
transfer data to any address within the 16 MB space.
Note:
When the BF bit of ISCS is set to update, only the lower 16 bits of BAP change while BAPH does not
change.
76
2
OS Termination Control Bit
Service is terminated by a request from the built-in resource.
Service is not terminated by a request from the built-in resource.
Setting
2
OS, so each channel of EI
2
OS can