CHAPTER 24 EXAMPLE OF MB90F553A SERIAL PROGRAMMING CONNECTION
•
As with the case in which the P00 pin is also used, the following control circuit is required
when the SIN, SOT, and SCK pins are also used by the user system. (The user circuit can
be disconnected by the /TICS signal of the flash microcontroller programmer during serial
programming.)
•
Connect the AF220/AF210/AF120/AF110, turning the user power supply off.
376
AF220/AF210/
AF120/AF110
programming
Ω
10k
control pin
AF220/AF210/
AF120/AF110
/TICS pin
MB90F553A
programming
control pin
User