Model 7071 Available Accessories - Keithley 7071 Instruction Manual

OPERATION
Table 2-2. Model 7071 Available Accessories
Model or Part
Model 7078~CIT: Insertion and Extraction Tools
Model 7UiB-HCT: Hand Crimping Tool
Model 7U78-KIT: Connection Kit (Plug)
Model 7078~M'IC-5: Mass Terminated Cable
Model 7(ns-m-20: Mass Terminated Cable
Model 7U78NTR: Connector Kit (Receptacle)
CS-570-3: Quick Disconnect Terminal Block
Description
Used to install/remove wire crimp tails into/from "rack
and panel" plugs and receptacles.
Used to connect wire crimp tails to W18 to U26 gage
wire.
Contains one "rack and panel" plug, housing and 40
wire crimp tails.
Same as the Model 7078~MlYZ-5 except that it is 6
meters (20 ft.) in length.
I
1.5 meter (5 ft.), 36 conductor cable terminated with
"rack and panel" plugs. Mates to "rack and panel"
receptacles.
Contains one "rack and panel" receptacle, 40 wire
crimp tails, and mounting hardware.
3-terminal block accomodates up to 16 AWG wires.
Mates to matrix card board pin terminals.
2-10