Optional) Setting The Aging Time Of The Router Interface; Optional) Setting Parameters Related To The Aging Time Of Member Interfaces - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast

10.7.2 (Optional) Setting the Aging Time of the Router Interface

Context
To set the aging time of the router interface, do as follows on the S3700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mld-snooping router-aging-time router-aging-time
The aging time of the router interface is set.
By default, if the router interface receives an MLD Query message, the S3700 sets the remaining
aging time of the interface to 180 seconds.
----End
10.7.3 (Optional) Setting Parameters Related to the Aging Time of
Member Interfaces
Context
To set the parameters related to the aging time of member interfaces, perform the following steps
at a random order.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mld-snooping query-interval query-interval
The interval for sending the General Query messages is set. The default value is 60 seconds.
Step 4 Run:
mld-snooping max-response-time max-response-time
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MLD Snooping Configuration
269