Holding And Storing T320 Fpcs; Holding T320 Fpcs - Juniper T320 Hardware Manual

Related
Documentation

Holding and Storing T320 FPCs

Copyright © 2010, Juniper Networks, Inc.
4 Empty 0
5 Empty 0
6 Empty 0
7 Empty 0
For more detailed output, add the
a slot number ( 0 ), which is optional:
user@host> show chassis fpc detail 0
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time:
Uptime:
seconds
For further description of the output from the commands, see the Junos OS System
Basics and Services Command Reference.
T320 Chassis Description on page 12
T320 Flexible PIC Concentrators (FPCs) Description on page 16
T320 Craft Interface FPC LEDs on page 39
Holding T320 FPCs on page 117
1.
Storing T320 FPCs on page 120
2.

Holding T320 FPCs

CAUTION: Many components on the FPC are fragile. Failure to handle FPCs
as specified in this document can cause irreparable damage.
NOTE: An FPC configured with PICs installed can weigh as much as 29 lb
(13.2 kg). Be prepared to accept the full weight of the FPC as you lift it.
To prevent damage when handling or carrying FPCs:
As you carry the FPC, do not bump it against anything. FPC components are fragile.
Do not grasp the FPC anywhere except places that this document indicates. In particular,
never grasp the connector edge, especially at the power connector in the corner where
the connector and bottom edges meet (see Figure 58 on page 118).
Chapter 12: Maintaining T320 Router Hardware Components
0 0 0
0 0 0
0 0 0
0 0 0
option. The following example also specifies
detail
Online
25 degrees C / 77 degrees F
256 MB
56 MB
1280 MB
2003-10-01 04:19:30 PDT
10 days, 7 hours, 16 minutes, 48
0 0
0 0
0 0
0 0
117