Holding And Storing T640 Fpcs; Holding T640 Fpcs - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
Related
Documentation

Holding and Storing T640 FPCs

152
For further description of the output from the commands, see the Junos OS System
Basics and Services Command Reference.
T640 Chassis Description on page 13
T640 FPC Description on page 18
T640 Craft Interface FPC LEDs and Online/Offline Buttons on page 45
Holding T640 FPCs on page 152
Storing T640 FPCs on page 155

Holding T640 FPCs

CAUTION: Many components on the FPC are fragile. Failure to handle FPCs
as specified in this document can cause irreparable damage.
NOTE: An FPC configured with PICs installed can weigh as much as 29 lb
(13.2 kg). Be prepared to accept the full weight of the FPC as you lift it.
To prevent damage when handling or carrying FPCs:
As you carry the FPC, do not bump it against anything. FPC components are fragile.
Do not grasp the FPC anywhere except places that this document indicates. In particular,
never grasp the connector edge, especially at the power connector in the corner where
the connector and bottom edges meet (see Figure 78 on page 153).
Copyright © 2010, Juniper Networks, Inc.