What's In The Crate; What Else Do I Need; Assemble The Rack Mount Kit - Juniper PTX10004 Manual

Hide thumbs Also See for PTX10004:

Table of Contents

Before you begin the installation, review

What's in the Crate?

Along with your PTX10004, you'll also find:

• A rack mount kit with:

• Twelve Phillips 8-32 x .375 in. flat-head screws

• Two rear rails

• A mounting tray

• A rear safety restraint

• The front door kit

• An accessory kit with:

• RJ-45 Ethernet cable

• RJ-45 to DB9 rollover cable

• Electrostatic discharge (ESD) wrist strap with cable

• Media kit (flash drives, PCMCIA card adapter)

• Ground chassis lug, 2-hole, 10-32, 4 AWG

• Power cord retainer clips, two for each power supply

• A mechanical lift rated for 250 lb (113.4 kg). You can mount a PTX10004 manually or by using a

mechanical lift. Because of the router's size and weight, we strongly recommend that you use a

mechanical lift to mount the PTX10004. In this guide, we show you how to mount the router using a

mechanical lift.

• 4 AWG (21.1 mm²) stranded wire grounding cable rated 75° C or per local electrical code

• A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack mount screws

• A number 3 Pozidriv or Phillips (+) screwdriver for the grounding screws

• Twenty eight rack mount screws appropriate for your rack to secure the mounting blades, mounting

tray, chassis, and safety restraint to the rack

General Safety Guidelines and

Warnings.

Table of Contents