System Setup; Initial Setup - Cardinal Health Kangaroo Omni 385400 Instructions For Use Manual

System Setup

Above image for illustrative purposes
only. Does not accurately depict
recommended setup.

INITIAL SETUP

1. Charge Kangaroo OMNI™ Enteral Feeding Pump
WARNING: The use of multiple socket-outlets or extension cords will compromise electrical safety and/or
increase the risk of electrical shock.
CAUTION: Avoid leaving wires, cords, or tubing in a pathway where a person could trip on them and sustain
an injury.
CAUTION: Use only the supplied power adapter to charge your Kangaroo OMNI™ Enteral Feeding Pump.
A
B
C
Important Note: A newly purchased Kangaroo OMNI™ Enteral Feeding
Pump comes with Kangaroo OMNI™ Enteral Feeding Pump, AC power
adapter, Kangaroo OMNI™ Feeding Set, and pole clamp. Kangaroo OMNI™
Enteral Feeding Pump and along with Kangaroo OMNI™ Feeding Sets and
accessories, need to be installed and put into service in accordance with the
information provided by this manual and accompanying documents.
A. Plug the power adapter into the power adapter port located on the
back of Kangaroo OMNI™ Enteral Feeding Pump.
B. Plug the other end of the power adapter into a nearby AC outlet.
C. Confirm the green Power Indicator Light is on to ensure
Kangaroo OMNI™ Enteral Feeding Pump is receiving power.
Note: Charge Kangaroo OMNI™ Enteral Feeding Pump for a minimum of
12 hours before initial use.
16