Attaching Cable And Sensor - Cardinal Health Alaris Directions For Use Manual

1. Attach applicable patient cable to
secure connection and patient cable is not twisted, sliced
or frayed.
2. Attach applicable sensor to patient cable. Reference
sensor's directions for use for detailed instructions.
3. Attach sensor to patient. Reference sensor's directions for
use for detailed instructions.
4-2
Getting Started

Attaching Cable and Sensor

p Module. Ensure
S O
2
WARNING
Model :
8210
Use only approved O
sensors, and
DOC–10
pulse oximetry cables.
Model :
8220
Use only approved Masimo
sensors and patient cables.
Use of sensors, transducers,
cables and accessories other
than those specified may cause
improper p Module performance
S O
2
resulting in inaccurate readings,
increased emission and/or
decreased immunity, and degraded
electromagnetic compatibility
performance of the
For a list of compatible sensors and
cables, reference the Sensor and
Cable Compatibility Card (provided
separately).
CHANNEL
SELECT
MONITOR
CHANNEL
OFF
Patient Cable
Attach patient
cable here.
®
Alaris System (with v9 Model 8000) DFU
SpO Modules Section
2
M
XI AX
and
OC–3
®
p Module.
S O
2
Attach sensor
here.