Digital Input/Output In3D/Out3D - BONFIGLIOLI Agile Operating Instructions Manual

7.6.4

Digital input/output IN3D/OUT3D

X11
558 Operation mode terminal X11.6 (digital input/output)
Terminal X11.6 can be set as a digital input or digital output. In the factory setting, terminal X11.6
can be used as input for dataset changeover.
Operation mode terminal
558
X11.6
0 - Input IN3D
1 - Output OUT3D
559 Digital inputs PNP/NPN
If the digital input output (terminal X11.6) is set as digital input, the evaluation can be selected as
PNP (high-switching) or NPN (low-switching) via parameter
Operation Mode Terminal X11.6
Digital inputs
559
PNP/NPN
0 - NPN (active: 0 V)
1 - PNP (active: 24 V)
The parameter also effect the NPN/PNP evaluation change-over of IN1D, IN2D, IN4D
and IN5D.
The digital input IN3D can control functions of the frequency inverter via signal "73 - IN3D". In the
factory setting, digital input IN3D has the function "Dataset changeover 1" if
558 is set to "0 - input IN3D".
nal X11.6
Parameters
Data Set Change-Over 1
The signal selected via parameter
put/output (terminal X11.6). Parameter
Output OUT3D".
Parameter
Operation Mode OUT3D (X11.6)
Agile
Operating Instructions
X13
X12
X11
1 2 3 4 5 6
The digital input/output is set as digital input. Factory setting.
The digital input/output is set as digital output.
558 must be set to "0 - Input IN3D".
Digital input NPN. Low-switching (with negative signal).
Digital input PNP. High-switching (with positive signal). Factory setting.
70
73 - IN3D (input signal at digital input IN3D)
Operation Mode OUT3D (X11.6)
Operation Mode Terminal X11.6
533
103 - Inv. Error Signal
06/2013
Function
Digital inputs PNP/NPN
Function
Factory setting
533, is output at the digital in-
Factory setting
186
Parameter descriptions
559. Parameter
Operation Mode Termi-
558 must be set to "1 -
Control inputs and outputs