BONFIGLIOLI Agile Operating Instructions Manual page 179

Parameter descriptions
560 Tolerance Band
The analog input characteristic with change of sign of the reference value can be adapted by the pa-
rameter
Tolerance Band
sage of the speed relative to the analog control signal. The parameter value (percent) is relative to
the maximum current or voltage signal.
Parameters
No. Description
560 Tolerance Band
Pos. maximum value
0 V
(0 mA)
(X1/Y1)
Neg. maximum value
Without tolerance band
The default
Minimum Frequency
ized tolerance band to the hysteresis.
pos. maximum value
pos. minimum value
neg. minimum value
neg. maximum value
Tolerance band with set maximum frequency
For example, the output variable coming from positive input signals is kept on the positive minimum
value until the input signal becomes lower than the value for the tolerance band in the negative direc-
tion. Then, the output variable follows the set characteristic.
Control inputs and outputs
560 of the application. The adjustable tolerance band extends the zero pas-
Min.
0.00%
(X2/Y2)
0 V
+10 V
(0 mA)
(+20 mA)
418 or
Minimum Reference Percentage
zero point
tolerance band
(X1/Y1)
179
Setting
Max. Fact. sett.
25.00%
(X2/Y2)
Pos. maximum value
zero point
tolerance band
(X1/Y1)
Neg. maximum value
With tolerance band
518 extends the parameter-
(X2/Y2)
+10 V
(+20 mA)
06/2013 Operating Instructions
2.00%
+10 V
(+20 mA)
Agile