BONFIGLIOLI Agile Operating Instructions Manual page 78

VABus
Parameter
Select the interface for settings of VABus parameters. (Ser-
vice interface X21 or communication module).
− Select service interface X21 for VABus communication.
Or:
− Select an optional communication module CM-232 or CM-
485 for VABus communication. The menu item is only
displayed if a communication module is installed.
394 CM: VABus Node-ID.
An optional communication module CM-232 or CM-485 was
selected.
1501 X21: VABus Node-ID.
The service interface X21 was selected.
10 Baudrate.
An optional communication module CM-232 or CM-485 was
selected.
1500 Baudrate.
The service interface X21 was selected.
395 Interface setting. Protocol (CM/X21).
− Set the service interface X21 to VABus.
Or:
− Set an optional communication module CM-232 or CM-
485 to VABus.
Or:
− Set the service interface X21 and an optional communi-
cation module CM-232 or CM-485 to VABus.
Agile
Operating Instructions
78
06/2013 Commissioning of a communication interface
Commissioning
Display







 


