BONFIGLIOLI Agile Operating Instructions Manual page 59

Commissioning
The selection Poti P is only available if the parameter
described above.
JOG
The function JOG is applicable for fixed speed operation.
Switch on enable signals at digital inputs STOA (terminal X11.3) and STOB (terminal X13.3).
•
If digital inputs are intended for start-signals: Switch off the signals of the parameters
•
68 and
clockwise Start anticlockwise
Select  via arrow keys. Confirm by pressing ENT.
•
Select  via arrow keys. Confirm by pressing ENT.
•
RUN
Start drive
Keep pressed: The drive accelerates to the
5 Hz).
For clockwise rotation: Set the
For anticlockwise rotation: Set the
Set the acceleration value for clockwise rotation in parameter
(clockwise)
Set the acceleration value for anticlockwise rotation in parameter
anticlockwise
Parameter
Stop drive RUN Release the key: The drive decelerates and comes to a standstill.
Set the deceleration value for clockwise rotation in parameter
(clockwise)
Set the deceleration value for anticlockwise rotation in parameter
anticlockwise
ENT
Change The direction of rotation changes.
direction of The direction of rotation can be changed while the drive rotates or at standstill.
rotation
Display of drive status:
  The drive rotates at
The drive is stopped.
The alternating display shows the Jog frequency value and the message STOP.
The function JOG can also be activated via a digital input. Refer to chapter 7.5.1.6
"JOG frequency" and 7.6.6.7 "Jog Start".
The selection JOG is available independent of the setting of parameter
cal/Remote
1
The commands Start clockwise and Start anticlockwise have a higher priority than the start of the function JOG.
Operator panel
1
69
.
420.
422.
Maximum frequency
421.
423.
JOG frequency
412.
59
Local/Remote
JOG frequency
489 to positive values.
JOG frequency
489 to negative values.
JOG frequency
419 limits the adjustable frequency range.
489.
06/2013 Operating Instructions
412 was set like
Start
489 (factory setting
Acceleration
Acceleration
Deceleration
Deceleration
Lo-
Agile