BONFIGLIOLI Agile Operating Instructions Manual page 235

Parameter descriptions
730 Torque Limit
731 Torque Limit Generator Operation
The output value of the speed controller is limited by an upper and a lower torque limit, parameter
730 and parameter
Torque Limit
as a percentage of the rated motor torque. The assignment of fixed values or analog limit values is
done via the parameters
737.
Parameters
No. Description
730 Torque Limit
731 Torque Limit Generator Operation
Torque Limit Generator
731
Operation
Torque Limit
732 P-Comp. Torque Upper Limit
733 P-Comp. Torque Lower Limit
The output value of the P component of the torque controller is limited by parameter
732 and
Upper Limit P-Comp. Torque Lower Limit
a percentage of the rated motor torque.
Parameters
No. Description
732 P-Comp. Torque Upper Limit
733 P-Comp. Torque Lower Limit
739 Power Limit
740 Power Limit Generator Operation
The power output by the motor is proportional to the product of speed and torque. This output power
can be limited at the speed controller output with
740. The power limits are entered in kW.
eration
Parameters
No. Description
739 Power Limit
740 Power Limit Generator Operation
P = Nominal Frequency inverter power
FIN
o : Overload capacity of frequency inverter
c
Control functions
Torque Limit Generator Operation
Torque Limit Source Motor Op.
Min.
0.00%
0.00%
Anticlockwise
operation
M
generator
motor
730
Speed is limited by
Maximum Frequency
Min.
0.00%
0.00%
Min.
0.00 kW
0.00 kW
235
731. The limit values are input
736 and
Torque Limit Source Gen. Op.
Setting
Max. Fact. sett.
650.00% 650.00%
650.00% 650.00%
Clockwise
operation
Torque Limit
motor
generator
n
Torque Limit Generator
Operation
419
733. The limit values are input as torque limits as
Setting
Max. Fact. sett.
650.00% 650.00%
650.00% 650.00%
739 and
Power Limit Power Limit Generator Op-
Setting
Max. Fact. sett.
2⋅ o 2⋅ o
⋅P
c FIN
2⋅ o 2⋅ o
⋅P
c FIN
06/2013 Operating Instructions
730
731
P-Comp. Torque
⋅P
c FIN
⋅P
c FIN
Agile