BONFIGLIOLI Agile Operating Instructions Manual page 177

Parameter descriptions
7.6.2.1.2 Voltage input characteristic and current input characteristic
For parameter
Operation Mode MFI2
must be selected.
Operation Mode MFI2
6 - Voltage, characteristic
7 - Current, characteristic
564 Characteristic Curve Point X1
565 Characteristic Curve Point Y1
566 Characteristic Curve Point X2
567 Characteristic Curve Point Y2
The analog input signal is mapped to a reference frequency or percentage. Parameterization can be
done via two points of the linear characteristic of the reference value channel.
Point 1 with coordinates X1 and Y1 and point 2 with coordinates X2 and Y2 can be set in four data
sets.
Parameters
No. Description
564 Characteristic Curve Point X1
565 Characteristic Curve Point Y1
566 Characteristic Curve Point X2
567 Characteristic Curve Point Y2
The coordinates of the points relate, as a percentage, to the analog signal with 10 V or 20 mA and
parameter
Maximum Frequency
tion of rotation can be changed via the digital inputs and/or by selection of the points.
WARNING
The monitoring of the analog input signal via the parameter
563 demands the check of parameter
In the settings
− "6 - Voltage, characteristic" or
− "7 - Current, characteristic"
of parameter
Operation Mode MFI1
Y (X2=98%/Y2=100%)
Pos. maximum value
50 Hz
(X1=2%/Y1=0%)
0 V
0.2 V
(0 mA)
Neg. maximum value
Control inputs and outputs
562, "6 - Voltage, characteristic" or "7 - Current, characteristic"
562
Voltage signal (MFI2A), 0 V ... 10 V. The output signal is influ-
enced by the set characteristic. The characteristic can be set via
parameters 564 ... 567.
Current signal (MFI2A) 0 mA ... 20 mA. The output signal is in-
fluenced by the set characteristic. The characteristic can be set
via parameters 564 ... 567.
Min.
0.00%
-100.00%
0.00%
-100.00%
419 or parameter
Maximum Reference Percentage
Characteristic Curve Point X1
452, the following characteristic is effective:
Point 1:
X1 = 2.00%
Y1 0.00%
=
Point 2:
X2 98.00%
=
9.8 V
Y2 10 0.00%
=
X
+10 V
(+20 mA)
177
Function
Setting
Max. Fact. sett.
100.00% 2.00%
100.00% 0.00%
100.00% 98.00%
100.00% 100.00%
Error/Warning Behaviour
⋅ 10 V = 0.20 V
50.00 Hz 0.00 Hz
⋅ =
10 V 9.80 V
⋅ =
50.00 Hz 5 0.00 Hz
⋅ =
06/2013 Operating Instructions
519. The direc-
564.
Agile