Parameter descriptions
Block diagram
The block diagram shows the reference percentage setting options.
Lock the control possibilities of the control panel
If the setting possibility of the reference percentage at the operator panel must be locked:
For parameter
•
Reference Percentage Source 1
be selected and
•
for parameter
Reference Percentage Source 2
be selected.
•
Set parameter
Set Password
"Set password".
NOTE
The setting of Parameter
keypad. Start, Stop, Change direction of rotation, Poti F and Poti P are still available.
Reference Values
476 the setting "5 - Keypad-Motorpot." must not
494 the setting "5 - Keypad-Motorpot." must not
27 to prevent the resetting of parameters. Refer to chapter 7.1.3
27 only does not lock the control facilities of the
Set Password
153
06/2013
Operating Instructions
Agile