BONFIGLIOLI Agile Operating Instructions Manual page 251

Parameter descriptions
436 Ramp-up Time
437 Ramp-down Time
438 TraverseAmplitude
439 Proportional Step
In the case of the master drive, the superimposed traverse frequency is linearly opposite to the limit
438 and then reverses its direction. When the direction is reversed, a proportion-
Traverse Amplitude
al step is effected. Via a handshake signal, the master drive informs the slave drive that the traverse
output has changed its direction. The traverse function of the slave drive has the same gradient as the
traverse function of the master drive, but an opposite sign. When the slave drive reaches the limit
438 before switch-over of the handshake signal, the frequency is maintained until
Traverse Amplitude
switch-over is effected. If the handshake signal is received before the frequency limit is reached, the
direction is reversed immediately.
The Percentage values of
frequency value set up by
f
Master drive
Reference
48
Frequency
0
f
Slave drive
Reference
48
Frequency
0
Handshake
Parameters
No. Description
436 Ramp-up Time
437 Ramp-down Time
438 Traverse Amplitude
439 Proportional Step
Input signals
Reference Frequency
Handshake Traverse Function
Signal "14 - Traverse Function Output" is added to the reference frequency value.
During traverse operation, the configured traverse parameter values cannot be changed.
The source of the handshake signal is selected via
Special functions
438 and
Traverse Amplitude
48.
Reference Frequency
Proportional Step
Ramp-down
Ramp-up
Time
436
Time
Min.
0.01 s
0.01 s
0.01%
0.00%
Traverse function
Operation Mode
48
Ramp-up Time
49
Ramp-down Time
Traverse Amplitude
Proportional Step
Handshake Traverse Function
251
Proportional Step
439
Traverse Amplitude
437
Setting
Max. Fact. sett.
320.00 s
320.00 s
50.00%
50.00%
Output signals
435
436 14 - Traverse Function Output
15 - Traverse Function Handshake
437
(from Master drive)
438
439
06/2013 Operating Instructions
439 refer to the current
438
t
t
t
5 s
5 s
10%
0.01%
49.
Agile