BONFIGLIOLI Agile Operating Instructions Manual page 164

689
Operation Mode
0 - Off
P. 685 Numera-
1 - tor/P. 686 Denom-
inator
Analog Numera-
2 - tor/P. 686 Denom-
inator
P. 685 Numera-
3 - tor/Analog De-
nominator
Block diagram of electronic gear:
Repetition Frequency Input
PLC-Output Frequency 4
Source Master Reference
Gear Factor Numerator
Gear Factor Denominator
Analog factor at 100%
Reference percentage value
Reference Percentage Source 1
Reference Percentage Source 2
Actual value
Reference Percentage Value
Agile
Operating Instructions
The electronic gear is deactivated. Factory setting.
The repetition frequency value specified via the repetition frequency input
is multiplied by the gear factor. This is the reference frequency for the
slave drive.
The gear factor is calculated from the values of parameters
685 and
Numerator Gear Factor Denominator
The repetition frequency value specified via the repetition frequency input
is multiplied by the gear factor. This is the reference frequency for the
slave drive.
The numerator of the gear factor is scaled using the
476. The denominator of the gear factor is the value set in pa-
Source 1
rameter
Gear Factor Denominator
The repetition frequency value specified via the repetition frequency input
is multiplied by the gear factor. This is the reference frequency for the
slave drive.
The numerator of the gear factor is the value set in parameter
685. The denominator of the gear factor is scaled using the
tor Numerator
Reference Percentage Source 1
Ramp output
Fixed Frequency 1
288
2504
125
689
Operation Mode
685
686
687
688
Analog factor at 0%
Reference percentage value
476
494
229
06/2013
Function
686.
476.
0
1
x
Actual value
Reference Ramp
Frequency
0
0
3
1
2
0% 100%
300%
-300%
164
Parameter descriptions
Gear Factor
686.
Reference Percentage
Gear Fac-
283
Reference Values