BONFIGLIOLI Agile Operating Instructions Manual page 144

Reference Frequency Source 1
Reference Frequency Source 2
2502 - PLC Output Frequency 2
The reference frequency channel can be used in all configurations (parameter
Block diagram
The block diagram shows the reference frequency specification options.
Lock the reference value facilities of the control panel
If the setting possibility of the reference frequency at the operator panel must be locked:
For parameter
•
Reference Frequency Source 1
selected and
for parameter
•
Reference Frequency Source 2
selected.
Set parameter
•
Set Password
"Set password".
Agile
Operating Instructions
475
492
Frequency output 2 of a PLC function block is the refer-
ence value source. See application manual "PLC".
475 the setting "5 - Keypad-Motorpot." must not be
492 the setting "5 - Keypad-Motorpot." must not be
27 to prevent the resetting of parameters. Refer to chapter 7.1.3
144
06/2013
Parameter descriptions
Function
Configuration
Reference Values
30).