BONFIGLIOLI Agile Operating Instructions Manual page 338

273 Application Warnings
367 Application warning status
Parameter
Application Warnings
Parameter
Application warning status
Meaning of code displayed by parameters
367:
State
Code
A 00 00 NO WARNING
A 00 01 BELT
A 00 40 SERVICE
A 00 80 User 1
A 01 00 User 2
Output signals
Application Warnings are signaled via digital signals.
216 -
Warning, application
26 -
1)
For linking to frequency inverter functions
2)
For output via a digital output. Select the signal source for one of the parameters 531, 532, 533,
554. See chapter 7.6.5 "Digital outputs".
Agile
Operating Instructions
273 displays the current warning.
367 displays the warning at failure switch-off.
Application Warnings
No warning message present.
Warning V-belt by Operation Mode 581.
Service of DC link or fan required. The time remaining until next ser-
vice has expired. At least for one of the parameters
Service Interval DC-link
1535 the setting "2 - Warning" is selected.
Fan
− Service of DC-link required. The value of
1530 has reached the value 0%.
link
− Service of fan required. The value of
has reached the value 0%.
The signal set on digital input
The signal set on digital input
1)
Signal if a message is output
2)
338
06/2013
Operational and error diagnosis
273 and
Warning status
1534 or
Operation Mode Service Interval
Service Interval DC-
Service Interval Fan
1363 is active.
User Warning 1
1364 is active.
User Warning 2
Application Warnings
Warning status and warning status application
Application Warning
Operation Mode
1531
273.