System Data; Service Interval Monitoring; Copy Parameters - BONFIGLIOLI Agile Operating Instructions Manual

Parameter descriptions

7.10.9 System data

For monitoring the application, process parameters are calculated from electrical control parameters.
389 Factor Actual System Value
1543 Base Parameter Actual System Value
Actual values (e.g. actual frequency, torque) can be scaled. The drive can be monitored via the actual
value
Actual System Value
The actual value to be monitored and scaled must be selected. For parameter
1543, the number of the actual value parameter must be set. The value of the actual
System Value
value parameter is multiplied by the
eter
Actual System Value
242 = (actual value from parameter 1543) x
Actual System Value
Parameters
No. Description
389 Factor Actual System Value
Parameters
No. Description
Base Parameter Actual Sys-
1543
tem Value
Factory setting:
242 = (
Actual System Value
Set an actual value (parameter number) in parameter
•
1543.
ue
Set a factor in parameter
•
Parameter
Actual System Value

7.10.10 Service interval monitoring

Refer to chapter 10.3 "Monitoring of service interval".

7.10.11 Copy parameters

Parameter values can be saved on a memory card via operator panel or via PC control software VPlus.
Note:
Field bus communication is not possible or faulty during data storage or data reading by means of the
memory card.
Note:
To use the copy function, use the memory card ("Resource pack") offered by Bonfiglioli Vectron.
Bonfiglioli Vectron doesn't take any responsibility for the malfunctioning of the memory cards of other
manufacturers.
Special functions
242.
Factor Actual System Value
242.
Min.
-100.000
Parameter number
of actual value
241) x 1.000
Actual Frequency
Factor Actual System Value
242 shows the scaled actual value.
253
Base Parameter Actual
389 and can be read out via param-
Factor Actual System Value
Setting
Max. Fact. sett.
100.000 1.000
Setting
Min. Max.
0 1600
(Actual frequency)
Base Parameter Actual System Val-
389.
06/2013 Operating Instructions
389
Fact. sett.
241
Agile