Typical Cross-Sections - BONFIGLIOLI Agile Operating Instructions Manual

Electrical Installation

5.4.1 Typical cross-sections

The following table provides an overview of typical cable cross-sections (copper cable with PVC insula-
tion, 30 °C ambient temperature, continuous mains current max. 100% rated input current). Actual
cable cross-section requirements may deviate from these values due to actual operating conditions.
Single-phase connection (L1/N), 230 V
Type Mains cable
-01 0.09kW
-02 0.12 kW
-03 0.18 kW
-05 0.25 kW
-07 0.37 kW 1.5 mm²
-09 0.55 kW
-11 0.75 kW
-13 1.1 kW
-15 1.5 kW
-18 2.2 kW 2.5 mm²
-19 3.0 kW
4 mm²
-21 3.0 kW
1)
Connection on protective earth on mounting plate.
Three-phase connection (L1/L2/L3), 230 V
Type Mains cable
-01 0.18 kW
-02 0.25 kW
-03 0.37 kW
-05 0.55 kW
-07 0.75 kW 1.5 mm²
-09 1.1 kW
-11 1.5 kW
-13 2.2 kW
-15 3.0 kW
-18 4. kW 2.5 mm²
-19 5.5 kW 4 mm²
-21 7.5 kW 6 mm²
1)
Connection on protective earth on mounting plate.
Three-phase connection (L1/L2/L3), 400 V
Type Mains cable
-03 0,25 kW
-02 0,37 kW
-05 0.55 kW
-07 0.75 kW
-09 1.1 kW 1.5 mm²
-11 1.5 kW
-13 2.2 kW
-15 3.0 kW
-18 4.0 kW
-19 5.5 kW
-21 7.5 kW 2.5 mm²
-22 9.2 kW
-23 11.0 kW 4 mm²
1)
Connection on protective earth on mounting plate.
Please note, that the mentioned typical cross sections do not consider other factors like fuses. Comply
with applying local standards and applying branch standards.
Dimensioning of conductor cross-section
PE-conductor
2x1.5 mm² or 1x10 mm²
2x2.5 mm² or 1x10 mm²
2x4 mm² or 1x10 mm²
PE-conductor
2x1.5 mm² or 1x10 mm²
2x2.5 mm² or 1x10 mm²
2x4 mm² or 1x10 mm²
2x6 mm² or 1x10 mm²
PE-conductor
2x1.5 mm² or 1x10 mm²
2x2.5 mm² or 1x10 mm²
2x4 mm² or 1x10 mm²
35
06/2013
Motor cable
1)
1.5 mm²
1)
1.5 mm²
1)
1.5 mm²
Motor cable
1)
1.5 mm²
1)
1.5 mm²
1)
4 mm²
1)
4 mm²
Motor cable
1)
1.5 mm²
1)
2.5 mm²
1)
4 mm²
Operating Instructions
Agile