Primus, Zeus And Apollo Anesthesia Devices - Dräger Infinity Delta Instructions For Use Manual

28 P
ERIPHERAL

Primus, Zeus and Apollo Anesthesia Devices

The Delta/Delta XL/Kappa monitor displays data from the devices listed at the
beginning of this chapter.
When the monitor is connected to an Infinity Primus or Apollo anesthesia machine, it
displays the concentrations of CO
Isoflurane, Enflurane, Sevoflurane, or Desflurane). The table on page 28-15 lists all
displayed parameters.
NOTE: The Infinity Primus and the Zeus anesthesia machines are not sold in the
United States.
The monitor uses the multigas parameter box and waveform channels to display
parameter values, waveforms, and loops. The agent parameter box displays agent
concentrations for anesthetic gases.
Parameter values acquired from the anesthesia machine are trended in graphical and
tabular form.The anesthesia machine provides the range and resolution for all
parameters.
NOTE: The bedside monitor displays the Minimum Alveolar Concentration (MAC*)
values only if available and sent by the Infinity Primus or Apollo anesthesia machine.
Parameter settings, alarms, and error messages are not displayed on the monitor, they
are displayed on the network device such as an Infinity CentralStation, Innovian,
Gateway, Symphony instead. See the Instructions for Use for your network device for
the list of parameters transferred from the anesthesia machine. Refer to the Primus and
Apollo instructions for Use for details on calculating parameter values.
28-14
D A
EVICES AND
O
2,
D /D
ELTA
S
SSOCIATED OFTWARE
N O, and of anesthetic agents (Halothane,
2, 2
XL/K
ELTA APPA
VF8