Dräger Infinity Delta Instructions For Use Manual page 567

Cardiac Output
Parameter display:
Measurement method:
Measurement range:
Accuracy:
Degree of protection against electric
shock:
Defibrillation protection:
Pulse Oximetry OxiSure SpO
Parameter display:
Measurement method:
Measurement range:
Resolution:
Calibration range:
Display range:
Display update period:
Maximum hold from previous update:
Measurement accuracy, adult mode
Saturation (%SpO ):
2
0 to 69% not specified
70 to 100% sensor-specific as follows:
Dräger :
OxiSure sensor - D
(4)
Nellcor :
D-25/D-25L, D-20, I-20, N-25, OxiMAX MAX-A, OxiMAX MAX-AL,
OxiMAX MAX-P, OxiMAX MAX-N, OxiMAX MAX-I
Nellcor :
DS100A
(4)
Masimo:
LNOPADT, LNOPPED, LNOPNEO, LNOPNEO SS,LNOP-YI
Masimo:
LNOP-DCI, LNOP-DCIP, NR125
EAR
Pulse rate:
Measurement accuracy and notes continued on next page.
VF8 D
Cardiac output, blood temperature, Injectate
temperature
Thermodilution
Cardiac output:0.5 to 20 L/min
Blood temperature:25 to 43 °C (77 to 109 °F)
Injectate temperature:–5 to +30 °C (23 to 86 °F)
Cardiac output: ±5% (with 0° C injectate)
Injectate temperature: ±0.25 °C
Type CF
Defibrillation-proof applied part per IEC 60601-1
Saturation (%SpO
Transmission spectrophotometry
SpO
Pulse rate:30 to 250 1/bpm
SpO
Pulse rate:1 b/min
70 to 100 %
0 to 100 %
2 seconds
30 seconds (in the event of artifact or other error)
(1, 2, 3, 5)
:
±3 beats/min or ±3% (whichever is greater)
/D XL/K
ELTA ELTA
M
ONITORING
via MultiMed
2
), pulse rate
2
: 1 to 100 %
2
: 1 %
2
APPA
S
PECIFICATIONS
±2
±2
±3
±2
±2
±3.5
B-41