Dräger Infinity Delta Instructions For Use Manual page 159

Menu
Description
Selection
This submenu allows you to configure the following functions.
ECG Determines the number and
Channels format of displayed ECG
waveforms
NOTE: The TruST 12-lead
derived leads cannot be
displayed as ECG1 or ECG2.
They can only be displayed in
the Show All Leads view.
Channel 1 Selects leads for continuous
display in ECG channel(s) on
Channel 2
the main screen.
Channel 3
12 Lead Configures monitor for Standard
Position or Frank 12-lead monitoring (see
page 8-13 for more information).
VF8 D
The Lead Setup submenu
/D XL/K
ELTA ELTA
Available Settings
• ECG1 – displays the primary ECG signal.
• ECG1 & 2 – displays two ECG signals.
• ECG1 & 2 & 3 – displays three ECG channels.
• Cascade – cascades ECG1 data into the
second channel.
Channel 1, Channel 2, Channel 3 (scroll
through the list of available leads and click to
select for display).
NOTE: The Cable Type setting determines the
list of available leads for selection.
• Standard – configures the monitor for
standard 12-lead monitoring.
• Frank – configures the monitor for Frank
12-lead format.
APPA
ECG S M
ETUP ENU
8-19