Sampling Methods - Dräger Infinity Delta Instructions For Use Manual

Infinity delta series patient monitoring device

Hide thumbs Also See for Infinity Delta:

Table of Contents

Sampling Methods

For mainstream detection, the sensor is located within the patient's airway or

breathing circuit, allowing you to monitor individual breathing cycles of the intubated

patient. This method is appropriate for neonatal as well as adult and pediatric patients.

Mainstream Monitoring Setup

1. Click on etCO

4. Select a mainstream airway adapter.

Make sure the windows are clean and

dry. Clean or replace the adapter if

5. Align the marks on bottom of the adapter

with the sensor.

6. Snap firmly into place.

7. Insert the adapter in a vertical position

between the elbow and ventilator circuit "Y.

8. Position sensor cable away from patient.

9. Confirm proper connection on the etCO

During nebulization or suction for intubated patients, remove the sampling line

luer connector from the monitor to avoid moisture buildup and sampling line

Replace the sampling line according to hospital protocol or when a blockage is

indicated by the device. Excessive patient secretions or a build-up of liquids in

the airway tubing may occlude the sampling line, requiring more frequent

replacement.

parameter box to access

Measurement Mode

Show Quick Links

Table of Contents

Infinity delta xl Infinity kappa