Dräger Infinity Delta Instructions For Use Manual page 571

Measurement accuracy, Neonatal mode (1, 2):
Saturation (%SpO2):
0 to 60% not specified
60 to 80% sensor-specific as follows:
Nellcor :
OxiMAX MAX-N
Nellcor :
SC-PR, SC-NEO, OxiCliq N, D-YS, OXI-A/N
70 to 100% sensor-specific as follows:
Nellcor:
Nellcor :
OxiMAX MAX-N, SC-PR, SC-NEO
Nellcor :
OxiCliq N
Nellcor :
D-YS, OXI-A/N
Pulse Rate(3):
NOTES:
1) Since pulse oximeter measurements are statistically distributed, only about two-thirds of those
measurements can be expected to fall within ±1 A
2) The Infinity® Nellcor Oximax® SpO2 SmartPod™ pulse oximeter with Adult sensors has been
validated in human blood studies on healthy adult volunteers in induced hypoxia studies in the
range of 70-100% SpO2 against a laboratory co-oximeter and ECG monitor. This variation
equals ±1 A of the value measured by a co-oximeter.
rms
3) The pulse rate accuracy has been validated on healthy adult volunteers during induced hypoxia
studies in the range of 70-100% SpO2 against a laboratory co-oximeter and ECG monitor. This
variation equals ±1 A
Nominal wavelength:
tpO /CO
2 2
Parameter display:
Sensing element:
Measurement range:
Resolution:
Reporting interval:
Accuracy:
Drift:
Non-linearity:
Hysteresis:
VF8 D
of the pulse rate value measured by the ECG monitor.
rms
Red: 660 nm
IR: 910 nm
tpO2, tpCO2 parameter values; plus selectable on oxy-
cardirespirogram
tpO2/tpCO2 solid-state, dual-thermistor electrode
tpO2: 0 to 800 mmHg
tpCO2: 0 to 200 mmHg
1 mmHg
once every 1.2 s
tpO2: 40 to100 mmHg ±1 mmHg
<40 or >100 mmHg ±2 % or ±5 mmHg,
whichever is greater
tpCO2: 30 to 80 mmHg: ±1 mmHg
<30 or >80 mmHg ±3 mmHg
O2: ±5 % over recommended calibration interval
CO2: ±10 % over recommended calibration interval
±5 mmHg
±5 mmHg
/D XL/K
ELTA ELTA
M
ONITORING
±3 beats/min or ±3% (whichever is greater)
of the value measured by a co-oximeter.
rms
APPA
S
PECIFICATIONS
±3
not specified
±2
±3.5
±4
B-45