Picco Parameter Setup - Dräger Infinity Delta Instructions For Use Manual

26 P C
ULSE ONTOUR
Parameter boxes for Continuous
Pulse Contour Analysis parameters
will display PCCI, PCCO, p-SVI,
SVV, p-SVR, p-SVRI and
dPmax.Parameter boxes for
Continuous Pulse Contour Analysis
parameters will display PCCI,
PCCO, p-SVI, SVV, p-SVR and p-
SVRI. A typical Continuous Pulse
Contour Analysis parameter box is
shown in the illustration to the right:

PiCCO Parameter Setup

To access the setup menu for the PiCCO pod
Click on the PiCCO parameter box on the main screen.
or
1. Press the
2. Click on
3. Click on
4. Click on
5. Click on
6. Scroll to the PiCCO pulse contour parameter you want to assign as
Parameter 1 (PCCO, PCCI, p-SV, p-SVI, SVV, p-SVR, p-SVRI, PPV, or
dPmax, PCCO, PCCI, p-SV, p-SVI, SVV, p-SVR, p-SVRI, or PPV) and
click.
7. Repeat the previous two steps for
NOTE:
selections that appear after you select the appropriate parameter box. These references are shown
below the p-CO selection (see page 26-20).
26-16
C
ARDIAC
fixed key to display the Main menu.
Menu
.
Patient Setup
.
Parameters
.
PiCCO-PC
Parameter 1
Values for p-BT and p-IT are displayed in the Pulse Contour and Thermodilution menu
D /D
ELTA
O (P CCO)
UTPUT I
1 Pulse contour values
2 Parameter labels
Parameter 2
XL/K
ELTA APPA
MONITORING
and
Parameter 3.
VF8