Waveforms; Loops - Dräger Infinity Delta Instructions For Use Manual

Infinity delta series patient monitoring device

Hide thumbs Also See for Infinity Delta:

Table of Contents

Waveforms

Pressure waveforms are displayed next to the Paw parameter box. You can choose to

display either a flow waveform or a volume waveform next to the Vent parameter box

and size the waveform.

To choose between flow or volume waveforms:

1. Click on the Vent parameter box

To set or modify the size of the waveform:

1. Click on the parameter box labeled

menu). Available settings vary according to the type of waveform you wish to

configure. See page 21-8 for more information about these settings.

3. Scroll to the desired size and click to confirm your choice.

Loops are graphical representations of waveform data collected by the ventilator.

Pressure/Volume loops and Flow/Volume loops offer valuable information about the

patient's response to mechanical ventilation.

The monitor automatically erases older loops and replaces them with newer ones. The

last loop drawn is the brightest.You can save and display a Reference Loop, which

serves as a useful point of analysis and comparison.

fixed key (see page 21-11) to get to the

Waveform Display

, and click to confirm your choice.

fixed key (see page 21-11) to get to the

(on Paw menu) or

Vol Scale (on

Show Quick Links

Table of Contents

Infinity delta xl Infinity kappa