Primus Infinity Empowered As A Wall/ Ceiling Device (Optional); Characteristics - Wall Device - Dräger Primus Infinity Empowered Instructions For Use Manual

Primus Infinity Empowered as a wall/ceiling device (optional)
Characteristics – wall device
The wall device is permanently installed and can be
delivered as a left swiveling or right swiveling ver-
sion.
Optionally, a shelf can be mounted above the an-
esthesia device, which, if required, can be addition-
ally supplemented by a drawer.
Structure of wall holder:
F
E
A Wall plate
B Cable rest
C Angle brackets
D Release knob
E Swivel shelf
F Swiveling axis
Instructions for use Primus Infinity Empowered SW 4.5n
Access to the back of the device
The Primus Infinity Empowered can be
swiveled up to 90° from the wall.
Pull the release knob (D) and swivel the an-
esthesia device up to a maximum of 90° using
the handle of the Primus Infinity Empowered.
Depending on which side of the wall mount sup-
port the swiveling axis (F) is on, the release
knob (D) can be found on the left or right side.
CAUTION
Risk of collision
Options or accessories mounted on the side
swivel arm may collide with other objects or per-
A
sons in the operating theater during positioning
and/or operation.
B
Take special care when positioning the anesthe-
sia machine.
Connect the gas supply and the electrical con-
C
nections, see page 59 and page 70.
Connect potential equalization cable.
D
To route the cable, use the cable rest (B) on the
wall mount.
After work is completed on the back of the de-
vice
Swivel the device to the wall again until the re-
lease mechanism clicks into the locked position.
Make certain that Primus Infinity Empowered is
securely fixed to the wall by pulling slightly.
NOTE
Always place the device in the wall position – this
is space-saving and a protection against damage.
Assembly and preparation
57