C.o. Setup Menu; Quick Reference - C.o. Setup - Dräger Infinity Delta Instructions For Use Manual

15 C O
ARDIAC
Cardiac output signals, injectate temperature (IT), and blood temperature (BT) can be
obtained from the 2-pressure pod (Hemo2) or the 4-pressure pod (Hemo4, or
MPod – Quad Hemo). You can acquire cardiac output signals but not body
temperature signals from the HemoMed.
NOTE: Both IT and BT signals must be obtained from the same pod.

C.O. Setup Menu

To access the C.O. setup menu
Click on the C.O. parameter box on the main screen.
or
1. Press the
2. Click on
3. Click on
4. Scroll to
Quick Reference – C.O. Setup
Menu Item
C.O. Start
Catheter Type
Catheter Size
15-6
(C.O.)
UTPUT
fixed key to display the Main menu.
Menu
.
Patient Setup
.
Parameters
and click to display the C.O. setup menu.
C.O.
Description
Starts a C.O. measurement (see page 15-10)
Displays the currently selected catheter type.
NOTE: Due to corporate mergers, Baxter
cardiac output catheters and accessories may
be labelled as being from Edwards. Ohmeda
cardiac output catheters and accessories may
be labelled as being from Becton Dickinson
(BD). Contact Edwards and/or BD if there is any
doubt as to the identity of the cardiac output
catheters or accessories.
Displays the currently selected catheter size.
NOTE: If Other is selected for Catheter Type,
this field is ghosted.
D /D
ELTA
XL/K
ELTA APPA
Available Settings
• Not applicable
Click on one of the following to
change the catheter type:
• BD/Ohmeda
• Edw./Baxter
• Arrow
• Other
Click on one of the following to
change the catheter size:
• 5, 7, or 7.5 F
VF8