Oxycrg (Ocrg) Monitoring - Dräger Infinity Delta Instructions For Use Manual

OxyCRG (OCRG) Monitoring

The monitor can display an oxycardiorespirogram (OxyCRG, or OCRG) in neonatal
mode. The OCRG displays three or six minutes of a continuously updated beat-to-beat
Heart Rate trend (bbHR), SpO
as well as apnea events. The monitor continues to update main screen parameters,
announce alarms, and initiate alarm recordings.
1 Activate cursor
2
Cursor time
3 Exit OCRG display
4 Display OCRG Review, Summary
menu (see page 12-10)
5 Display OCRG Setup Menu (see
page 12-12)
6
Trigger a timed recording of
displayed parameters
7 Current parameter values
NOTE: When two tpO
the main screen. The labels of the second pod are marked by an asterisk (*), hence the
parameter label tpO
shortened to tpO
VF8 D
or tpO
2
/CO pods are connected, each displays a parameter box on
2 2
*. (For screen display, the tpO
2
.)
2
/D XL/K
ELTA ELTA
O CRG (OCRG) M
XY
/O * trend, and respiration/etCO
2 2
11:23:26
8 Respiration/etCO
appears when an apnea event occurs
and is displayed.)
9
Respiration/etCO
10 Time base
11 Values at cursor time
12 Scale
13
Cursor
14 Eraser bar
/CO parameter label is sometimes
2 2
APPA
ONITORING
waveform,
2
label (Apnea label
2
waveform
2
12-9